Louvre roof stuck open, blades not moving, motor or actuator failed, leaking when closed, or controls not responding? We diagnose and repair operable roofs, opening roofs and motorised aluminium louvre roof systems across Sydney.
Louvre roofs are structural and mechanical systems. They involve motors or actuators, wiring, control modules, blade pivot assemblies, drainage channels and limit settings — all of which interact. A fault in one area can present as a symptom in another entirely.
We inspect the full system — motors, actuators, wiring handover points, blade movement, alignment, limit settings, drainage and overall condition — before recommending any repair or replacement. That approach saves money and produces a more reliable fix.
Experienced across major systems including Somfy, Linak, Elero, CW Products, Alpha, Becker, Simu, Nice, JBA, Merlin and others. We work on louvre roofs we have serviced and systems installed by other companies.
Send through a description and photos and we'll help identify the fault before attending.
Failed actuator, motor fault, blade shifted in its mounting, limit issue or control fault. The most common louvre roof complaint — and one of the most misdiagnosed.
Motor running without blade movement, actuator seized or stripped drive. We check the full drive system before recommending replacement.
Dead remote, lost pairing, faulty receiver or control module fault. We test the full control system before assuming the motor or actuator has failed.
Blades not seating fully, worn or damaged blade seals, blocked drainage or a blade shifted out of position. Leak diagnosis needs careful inspection — not every leak means the same fix.
One or more blades sitting at a different angle to the rest, not closing flush or creating gaps. Forcing a misaligned blade can damage the drive system — we diagnose first.
Blades not reaching the fully open or closed position, overshooting or stopping mid-travel. Limits drift over time and after power interruptions.
Sensor triggering incorrectly, holding blades closed when it shouldn't, or failing to trigger when it should. We check the sensor alongside the full control system.
Grinding, clicking or straining during blade travel. Often a drive component, blade pivot or alignment issue that gets worse if left untreated.
We repair louvre roofs installed by other companies, including older systems where the original installer or supplier is no longer available.
Residential louvre roofs — pergola-mounted, freestanding or attached to the house — are one of the more technically involved outdoor systems to repair. Motor or actuator faults, limit setting issues, blade alignment, wiring and control faults can all affect how the roof operates.
We inspect the full system before quoting. If the roof was installed by another company or the original supplier is no longer available, that's fine — send through photos and details of the system and we'll advise what we can do before attending.
We also integrate louvre roof servicing with the surrounding outdoor blind and zip blind systems where they're part of the same outdoor area setup.
Send through a description of the fault, your suburb and photos of the system if you have them. We'll contact you to confirm the next step.
For urgent issues — roof stuck open in rain — call 0477 059 687 directly.
Commercial louvre roof systems — cafés, restaurants, commercial buildings and large-span architectural projects — operate at a different scale and complexity to residential systems. Larger blade spans, higher-load actuators, more complex wiring, building automation integration and access at height all add to the diagnostic challenge.
We have experience working on large-scale commercial louvre roof installations across Sydney. If a commercial system has failed and is affecting the operation of a space, call us directly on 0477 059 687.
Not all louvre roof repairs are straightforward. Some systems are large-span commercial installations requiring equipment to access. Some are older systems where parts are no longer readily available. Some are imported systems with limited local documentation.
We approach each job by inspecting the system thoroughly first. If a repair is viable, we explain how. If parts are unavailable or the system is beyond economical repair, we tell you that clearly before any work is committed to.
Where a louvre roof is part of a broader outdoor setup that also includes zip blinds or outdoor blinds, we can service both systems in the same visit where it makes sense to do so.
Call or request a callback. Tell us what the system is doing, your suburb, the brand if you know it, and whether access is simple or requires equipment planning. Photos of the blades, motor, actuator or control unit help us understand the system before we attend.
We check the actuators, motor, wiring, control module, blade movement and alignment, limits, drainage and seals together. Louvre roof faults often require the full system to be checked before the actual cause becomes clear.
If the repair is viable and parts are available, we carry it out. If the system or specific components are beyond economical repair, we say so clearly before you commit to any spend.
ABN: 48 306 003 720
We service homes, apartments and commercial sites across Greater Sydney, including Western Sydney, the Hills District, Northern Beaches, Eastern Suburbs, North Shore, Inner West, Sutherland Shire, Liverpool, Bankstown, Campbelltown and surrounding areas.
Call 0477 059 687 or request a callback. Send through the fault, your suburb and photos of the system if you have them.