Stuck shutter, broken strap, failed motor or remote not responding? We diagnose and repair residential, commercial and shopfront roller shutters across Sydney.
Not every roller shutter needs a new motor. Faults come from many places — straps, winder boxes, guides, slats catching, end bearings, security springs, receivers, remotes, limit settings, power supply or wiring issues.
We open the pelmet, check what's actually happening, and diagnose the real cause before quoting anything. That approach saves you money and means the fix holds.
Experienced across major systems including Somfy, Linak, Elero, CW Products, Alpha, Becker, Simu, Nice, JBA, Merlin and others.
Whether the shutter is stuck completely or just playing up, send us a description and a photo and we'll help narrow it down before we attend.
Won't go up, won't go down, or stops halfway. Could be a jammed curtain, guide fault, end cap, slat damage or limit issue.
Often a failed motor, seized drive, capacitor fault or mechanical resistance. We check the full system before recommending a motor replacement.
Dead remotes, lost pairing, faulty receiver or switch fault. Often the receiver is the problem, not the motor.
Grinding, scraping, squealing or clunking during travel. Usually a guide issue, slat damage or worn bearings. Caught early, cheaper to fix.
Shutter overshooting, not closing fully or stopping short. Limits drift over time and after power outages. A quick adjustment — no parts needed.
Bent, dented or slats coming out of the guides. Can cause jamming or uneven travel. Often repairable without replacing the full curtain.
Electrical supply fault, tripped circuit or failed control board. We check power before assuming the motor has failed.
Crank handle or manual release not engaging on motorised units. Common after motor failure or after power outages.
Broken security springs, jammed lock bars or handle failures on commercial and shopfront shutters. We carry common parts on the van.
Broken strap, frayed webbing, stiff winder or the strap pulling away from the barrel — manual roller shutters have their own set of faults that don't involve motors at all.
We repair and replace straps, winder cassettes, pulleys, tape guides and related manual-control components. On older shutters where parts are harder to source, we'll tell you what's available before you commit to anything.
If you've got a manual shutter you'd like to convert to motorised, we can assess whether that's practical for your shutter's age, size and power access.
Motor Replacement & MotorisationSend through a short description of the fault, your suburb and a photo of the shutter or motor if you have one. We'll contact you to confirm the next step.
If the matter is urgent, call 0477 059 687 directly.
Shopfront shutters take more cycles, carry more weight and fail differently to residential shutters. High-cycle motors, security springs, lock bars, guide rails and heavy-duty curtains all need a different approach.
We repair commercial and shopfront roller shutters across Sydney. If your shutter is keeping a business locked out or left exposed, call us directly on 0477 059 687.
We work on shutters installed by other companies — including older systems where the original installer is no longer available.
Call or request a callback. Tell us what the shutter is doing, your suburb and the brand if you know it. A photo of the shutter or motor head helps us narrow down the likely fault before attending.
We open the pelmet, check the motor, controls, curtain, guides and limit settings. Some faults are obvious. Others need a proper look before we can quote. We won't quote until we know what's wrong.
If the repair makes sense, we carry it out. If the shutter is beyond economical repair, we'll explain why and what the options are — honestly, before you spend anything.
ABN: 48 306 003 720
We're not just a roller shutter company — we work across the broader outdoor shading category, which means our motor, control and diagnostic knowledge is sharper than a single-product operation.
Bill, who runs the work on the ground, has over a decade in the industry since 2013, with experience across blinds, security screens, awnings, roller shutters, manufacturing and project management at a leading Sydney louvre manufacturer. That manufacturing background is directly relevant — we understand how shutters are built, which makes us faster at working out why they've failed.
Experienced across major systems including Somfy, Linak, Elero, CW Products, Alpha, Becker, Simu, Nice, JBA, Merlin and others. We work on shutters we installed and shutters installed by other companies.
We service homes, shops and commercial sites across Greater Sydney, including Western Sydney, the Hills District, Northern Beaches, Eastern Suburbs, North Shore, Inner West, Sutherland Shire, Liverpool, Bankstown, Campbelltown and surrounding areas.
Call 0477 059 687 or request a callback. Send through the fault, your suburb and a photo if you have one, and we'll help you work out the next step.